GBS 300

Before use, the user must be trained in handling the machine 1) Place the grinder in the work area. 2) Check whether the dust cover is tight. 3) Check electrical specifications - 220V single phase, 50Hz. The power cord must be the national standard four square meters，Three cores, check the insulation condition. 4) Confirm buttons and other parts have not loosened as a result of transportation 5) Always wear personal safety equipment e.g. Ear protection, dust mask, Waterproof shoes and approved eye protection. 6) The machine should not be used in areas where fire or explosion may occur. 7) Make sure the power cord is not caught in a door, fence or similar. 8) After the wiring is completed, recheck to ensure that everything is ok